| 93 Camry 2.2L Distributor Rotor Replacement [message #765136] |
Tue, 06 June 2006 05:17 |
|
Hi,
Having a problem with an intermittent misfire under acceleration load.
Replaced Distributor cap, it was worn so I replaced it. Couldn't
release the rotor so I left it even though it was worn. Still getting
the misfire, though it isn't as bad as it was. How can I replace the
distributor rotor? (93 Camry 2.2L)
Thanks.
|
|
|
| Re: 93 Camry 2.2L Distributor Rotor Replacement [message #765189 ] |
Tue, 06 June 2006 19:36 |
|
randall.andrew [at] gmail.com wrote:
> Hi,
> Having a problem with an intermittent misfire under acceleration load.
> Replaced Distributor cap, it was worn so I replaced it. Couldn't
> release the rotor so I left it even though it was worn. Still getting
> the misfire, though it isn't as bad as it was. How can I replace the
> distributor rotor? (93 Camry 2.2L)
=======================
Have you checked the coil?
If it's under the cap, these have been known to cause problems.
|
|
|
| Re: 93 Camry 2.2L Distributor Rotor Replacement [message #765248 ] |
Wed, 07 June 2006 05:59 |
|
randall.andrew [at] gmail.com wrote:
> Hi,
> Having a problem with an intermittent misfire under acceleration load.
> Replaced Distributor cap, it was worn so I replaced it. Couldn't
> release the rotor so I left it even though it was worn. Still getting
> the misfire, though it isn't as bad as it was. How can I replace the
> distributor rotor? (93 Camry 2.2L)
> Thanks.
There is often a screw that holds the rotor on the shaft. With the cap
removed, have someone rotate the engine-you'll see the screw.
|
|
|
| Re: 93 Camry 2.2L Distributor Rotor Replacement [message #765256 ] |
Wed, 07 June 2006 11:31 |
|
William <wilbed [at] bellsouth.net> wrote:
> randall.andrew [at] gmail.com wrote:
> > Hi,
> > Having a problem with an intermittent misfire under acceleration load.
> > Replaced Distributor cap, it was worn so I replaced it. Couldn't
> > release the rotor so I left it even though it was worn. Still getting
> > the misfire, though it isn't as bad as it was. How can I replace the
> > distributor rotor? (93 Camry 2.2L)
> > Thanks.
> There is often a screw that holds the rotor on the shaft. With the cap
> removed, have someone rotate the engine-you'll see the screw.
No screw, this things fit tight. Pry it off.
|
|
|
| Re: 93 Camry 2.2L Distributor Rotor Replacement [message #765277 ] |
Wed, 07 June 2006 16:39 |
|
Yep and if it is that worn it may also have some rust under it as well
since it sounds like maintenance was neglected.
--
Steve W.
Life is not like a box of chocolates
it's more like a jar of jalapenos-
what you do today could burn your ass tomorrow!
"Edward Strauss" <es8m [at] Virginia.EDU> wrote in message
news:e666ea$7i3$1 [at] murdoch.acc.Virginia.EDU...
> William <wilbed [at] bellsouth.net> wrote:
>
> > randall.andrew [at] gmail.com wrote:
> > > Hi,
> > > Having a problem with an intermittent misfire under acceleration
load.
> > > Replaced Distributor cap, it was worn so I replaced it. Couldn't
> > > release the rotor so I left it even though it was worn. Still
getting
> > > the misfire, though it isn't as bad as it was. How can I replace
the
> > > distributor rotor? (93 Camry 2.2L)
> > > Thanks.
>
> > There is often a screw that holds the rotor on the shaft. With the
cap
> > removed, have someone rotate the engine-you'll see the screw.
>
>
>
> No screw, this things fit tight. Pry it off.
----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
|
|
|
