| 99 XLT brake lights not working [message #514693] |
Thu, 17 November 2005 15:57 |
|
None of the 3 brake lights are working. I've narrowed it down to either
the brake light switch on the pedal or the wiring at that connector. If
I wiggle the wiring the lights will start working for awhile. I can
also pivot the switch back and forth slightly on the pivot pin and get
the lights to come on. AFAICT the wiring and connector are OK. So, is
there a good chance that the switch is going bad and should be replaced?
|
|
|
| Re: 99 XLT brake lights not working [message #514701 ] |
Fri, 18 November 2005 04:37 |
|
jriechert [at] gmail.com wrote:
> None of the 3 brake lights are working. I've narrowed it down to either
> the brake light switch on the pedal or the wiring at that connector. If
> I wiggle the wiring the lights will start working for awhile. I can
> also pivot the switch back and forth slightly on the pivot pin and get
> the lights to come on. AFAICT the wiring and connector are OK. So, is
> there a good chance that the switch is going bad and should be replaced?
>
I went ahead and bought a new switch. Lights work fine now.
|
|
|
