| Bad vibration when accelerating 99 Blazer 4.3 - 4WD [message #513894] |
Wed, 16 November 2005 18:40 |
|
Hi everyone,
Whenever I take off from the stop position I would feel a reasonably
significant vibration through my steering wheel and on the floor board
of my 4WD 99 Chevy Blazer 4.3 vehicle. At first it didn't seem to
noticeable, but gradually over time its becoming more pronounced, but
as soon as I got to rolling speed (20-30 miles an hour) it disappears.
Yesterday, the vibration was so significant when taking off (definitely
something wrong) that I though about stopping the vehicle and towing it
home. I know it not the front wheel bearing because I change it less
than 3000 clicks ago.
Lately I've had the slightest cracking sound, similar to the sound you
get when opening the drivers door, which hasn't been lubricated lately
(You know how shitty the door mechanism hardware is on these vehicles)
when coming to a stop, which could be part of the problem.
Has anyone ever had this problem? What could it be?
Any help would be greatly appreciated!
Thanks, Rob
|
|
|
| Re: Bad vibration when accelerating 99 Blazer 4.3 - 4WD [message #513897 ] |
Wed, 16 November 2005 20:23 |
|
Dead u-joint would be my first guess. You can block the wheels and put
it in neutral, then go under and start shaking and twisting driveshafts
and front axle ends.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/index.html?id=2120343242
(More Off Road album links at bottom of the view page)
ROBinBRAMPTON wrote:
>
> Hi everyone,
>
> Whenever I take off from the stop position I would feel a reasonably
> significant vibration through my steering wheel and on the floor board
> of my 4WD 99 Chevy Blazer 4.3 vehicle. At first it didn't seem to
> noticeable, but gradually over time its becoming more pronounced, but
> as soon as I got to rolling speed (20-30 miles an hour) it disappears.
>
> Yesterday, the vibration was so significant when taking off (definitely
> something wrong) that I though about stopping the vehicle and towing it
> home. I know it not the front wheel bearing because I change it less
> than 3000 clicks ago.
>
> Lately I've had the slightest cracking sound, similar to the sound you
> get when opening the drivers door, which hasn't been lubricated lately
> (You know how shitty the door mechanism hardware is on these vehicles)
> when coming to a stop, which could be part of the problem.
>
> Has anyone ever had this problem? What could it be?
>
> Any help would be greatly appreciated!
>
> Thanks, Rob
|
|
|
