Producers » rec.autos.makers.mazda.miata » Heater Flap Problem
Heater Flap Problem [message #498248] Wed, 02 November 2005 20:40
dhawo  
Red 1990 Miata - "Little Miss Getaround"

Has anyone experienced a heater problem like this?

-When the flap is set to Recirc, I feel air coming out
of the vents. Of course this is not good on rainy days
as the windows fog up.

-When the flap is set to Fresh Air intake I feel no air
coming out of the vents, neither floor, dash or defrost.

I looked down under and have not found any disconnected
linkage. Im open for all ideas. Thanks you all... Dean
Re: Heater Flap Problem [message #498251 ] Wed, 02 November 2005 21:57
Lanny Chambers  
In article <HC8af.4065$m81.3005 [at] newsread1.news.atl.earthlink.net>,
dhawo <dhawo [at] yahoo.com> wrote:

> -When the flap is set to Recirc, I feel air coming out
> of the vents. Of course this is not good on rainy days
> as the windows fog up.
>
> -When the flap is set to Fresh Air intake I feel no air
> coming out of the vents, neither floor, dash or defrost.

That's backward. Are you sure you're reading the control symbols
correctly?

--
Lanny Chambers
'94C, St. Louis
http://www.hummingbirds.net/alignment.html
Re: Heater Flap Problem [message #507590 ] Wed, 09 November 2005 07:42
dhawo  
Lanny Chambers wrote:
> In article <HC8af.4065$m81.3005 [at] newsread1.news.atl.earthlink.net>,
> dhawo <dhawo [at] yahoo.com> wrote:
>
>
>>-When the flap is set to Recirc, I feel air coming out
>>of the vents. Of course this is not good on rainy days
>>as the windows fog up.
>>
>>-When the flap is set to Fresh Air intake I feel no air
>>coming out of the vents, neither floor, dash or defrost.
>
>
> That's backward. Are you sure you're reading the control symbols
> correctly?
>
Actually its not backwards in that one should feel air pressure
out any of the vent outlets when the fan motor is running.
Dean
Vorheriges Thema:took the NB plunge!
Nächstes Thema:2002 MX5 Transmission noise
Gehe zu:
  


aktuelle Zeit: Sat Jan 10 00:54:34 CET 2009

Insgesamt benötigte Zeit, um die Seite zu erzeugen: 0.16033 Sekunden
.:: Startseite - Hinweise - Impressum ::.

Powered