| Saturn 1996 sc [message #784758] |
Fri, 21 July 2006 14:49 |
|
There appears to be a broken spring in the tensioner.
The drivebelt suddenly became loose and lost power steering
and alt. and you can move the tensioner without effort.
Is there a simple way to change the tensioner or is this
a job for the shop?
Ernie
|
|
|
| Re: Saturn 1996 sc [message #784760 ] |
Fri, 21 July 2006 19:03 |
|
I replaced the one on my 94. It was a fairly easy job
until I had to go to the hardware store to get the
type of wrench I needed for one of the bolts. I believe
it was a combination wrench with a small ratchet
drive on one end. This was the only tool that fit in the
space and had room to turn. So be prepared to get
a new tool. To get the belt on or off you just turn the tensioner bolt
that's in the middle of the tensioner to loosen the belt.
Fred
"ernie" <ernests131 [at] charter.net> wrote in message
news:1153486157.830532.236340 [at] h48g2000cwc.googlegroups.com...
> There appears to be a broken spring in the tensioner.
> The drivebelt suddenly became loose and lost power steering
> and alt. and you can move the tensioner without effort.
> Is there a simple way to change the tensioner or is this
> a job for the shop?
> Ernie
>
|
|
|
| Re: Saturn 1996 sc [message #784762 ] |
Sat, 22 July 2006 00:50 |
|
Fred V. wrote:
> I replaced the one on my 94. It was a fairly easy job
> until I had to go to the hardware store to get the
> type of wrench I needed for one of the bolts. I believe
> it was a combination wrench with a small ratchet
> drive on one end. This was the only tool that fit in the
> space and had room to turn. So be prepared to get
> a new tool. To get the belt on or off you just turn the tensioner bolt
> that's in the middle of the tensioner to loosen the belt.
>
> Fred
You are right about new tools . I have a set of box end ratchet
but they were a little short to reach the top bolt from the top side.
I even removed the top motor mount. ( It didn't help much) but with my
daughter's
very small hands (her car) we got the top bolt in place and runni8ng.
ernie
>
> "ernie" <ernests131 [at] charter.net> wrote in message
> news:1153486157.830532.236340 [at] h48g2000cwc.googlegroups.com...
> > There appears to be a broken spring in the tensioner.
> > The drivebelt suddenly became loose and lost power steering
> > and alt. and you can move the tensioner without effort.
> > Is there a simple way to change the tensioner or is this
> > a job for the shop?
> > Ernie
> >
|
|
|
