| 70 mustang camber adjustment [message #783859] |
Sat, 22 July 2006 19:06 |
|
My front right camber is still 0.7 degrees in... I know after 36 years
the shock towers sag inward. What's the best way to correct the
problem? Can I push the shock tower out? Can the camber adjustment bolt
be fabricated to give more outward travel?
|
|
|
| Re: 70 mustang camber adjustment [message #783863 ] |
Sat, 22 July 2006 21:57 |
|
<rick [at] canoeoutriggers.com> wrote in message
news:1153587969.787559.39590 [at] h48g2000cwc.googlegroups.com...
> My front right camber is still 0.7 degrees in... I know after 36 years
> the shock towers sag inward. What's the best way to correct the
> problem? Can I push the shock tower out?
I know this isn't a fix, but do you have both a monte carlo bar and full
export brace installed? This will ensure the shock towers don't sag and
triangulates all the forces between the shock towers and the firewall. Check
out this pic if you're not sure what I'm talking about.
https://home.comcast.net/~vanguard92/enginebay.JPG
I had to jack up my '69 by the lower crossmember to get the towers to sag
back out enough to get everything to fit.
--
Scott W.
'68 Ranchero 500 302
'69 Mustang Sportsroof 351W
ThunderSnake #57
http://home.comcast.net/~vanguard92/
|
|
|
